Thursday, May 1, 2014

narrow hem: three ways


I sew a lot of narrow hems these days, and I've tried so many different methods to make them. The majority of tutorials for narrow or rolled hems (that I've seen) include a ton of measuring, trimming, or exhaustive pressing. Boo, ain't got time for that. What if you could make the narrowest of hems doing a minimal amount of all that stuff, and without a rolled hem foot? Yea, I said it.

A narrow hem has a finished depth of 1/8" to 1/4". The tiniest versions, baby hems (1/8"), are typically used to keep lightweight garments flowy without weighing down the edges, and to keep the hem of sheer fabrics as inconspicuous as possible. Due to the nature of their narrowness and the nature of the fabrics you will likely be sewing them on, these hems can be tricky to fold and sew evenly if you're doing a standard hem technique of measure-fold-press-measure-fold-press-sew. So here are some alternatives.

METHOD ONE: WITH A SERGER
For a 1/4" hem, my favorite method uses a serger for the first step. You can definitely do a similar method with a regular sewing machine, but I prefer the serger because it makes folding the hem easier; the width and sturdiness of the serged stitches help keep the fold perfectly even. You can also adjust the differential feed in case you want to tighten up the edge of your fabric ever so slightly to help with easing in a curved hem.

1. Set your stitch width so the left needle hits 1/4" away from the raw edges, or just within 1/4". Thread color doesn't necessarily matter as long as your fabric's not too sheer. Serge along the raw edge of the right side of your garment without cutting anything off. IF you're using a regular sewing machine, sew a line of stitches 1/4" from the raw edge, or just within 1/4" if possible.



2. Start folding the serged stitches toward the wrong side of the garment the same width as the stitches. Or if you didn't serge the edge, fold the edge under so your first sewn line of stitches juuuust rolls to the wrong side. The width of the stitches does all the measuring for you here. I only do a quick finger press to get the fold going, then immediately start sewing from the wrong side of the garment, using my hands to keep folding the edge before it reaches the presser foot.

Sew right along the folded edge, about 1/16" inward. This secures the first fold and makes a guide for stitching on the next fold:


My thread is darker blue so you can see it. Again, this is the wrong side of the garment now:



3. Fold the edge under once more, the same depth as the first fold. Working from the wrong side of the garment, sew along the line of stitching you created in the last step, folding the hem over as you go. This secures the hem perfectly by catching the top edge in your stitching:


You will have a single line of stitching on the right side, and a doubled line of stitching on the wrong side:


A classy hem, without any tedious pressing OR measuring.

METHOD TWO: WITH BAN-ROL
This little trick needs to be wider known. If you dig on the Internet you can find it in other tutorials, but I thought I'd go ahead and share it here to help spread the word. For an even tinier hem (~1/8"), I like to use the aid of Ban-Rol, also sometimes referred to as Ban Roll. wtf is that? It's a very sturdy starched interfacing used by tailors for stiffening waistbands in pant and skirts. It comes in various widths on continuous yardage. It's loosely woven, despite being stiff, so you can peel away the threads to create a "comb" that helps easily turn your fabric for hemming but will be pulled out after stitching.


The great thing about this method is that the Ban-Rol is reusable so you can make one small investment to have a lifetime of beautiful tiny hems. You can find it in 50-yard packs on Amazon and Wawak, but there's no way you would ever need that much. They sell it by the single yard online at the Sewing Place, Crafter's Vision, Londa's Creative Threads, and B. Black and Sons (edit: and Kenton Trimmings Online, for those in the UK). I'd recommend getting a few yards so you can create different "combs" for different hem widths, or just in case you ever have to hem a maxi-length circle skirt or something cray.

1. Snip into one bound edge in order to get the first vertical thread free. From there, you can start pulling out the threads with your fingers. Keep pulling the single thread until you have a length that matches or slightly exceeds the circumference of your hem:



Keep going until you create a "comb" that is the width of the hem you would like to have. So, this would work for super teeny hems and heftier hems:


2. Now align the edge of the comb with the RIGHT SIDE of the raw edge of your garment to be hemmed. If your fabric frays madly, move the ban-rol inward slightly to stay clear of the fray. Pin if you want, but I've found that the ban-rol doesn't really shift as long as you align it correctly as you sew.


3. Take it to the sewing machine, where you will stitch JUST INSIDE the inner edge of the comb part. You don't want your stitches to catch the still-woven part of the ban-rol. Remember the comb is pulled out of your stitches later, so you should only sew over the horizontal threads:



4. For fraying fabrics, trim the stray threads off now so they don't poke out of your hem later. Now gently flip the ban-rol all the way over to the wrong side of the fabric. This rolls the tiny hem for you without you having to measure all the way around or burn your fingers with the iron. For complete accuracy, you may want to press this part down so the hem is flattened first.


5. Stitch along the edge next to the ban-rol to secure the hem.



6. Now gently pull the ban-rol comb out of the stitches.


~OmG~ what a stable, perfectly minuscule hem you just made. And there's no double stitching to be seen:


Note that you can use ban-rol when hemming in the round. Just overlap it where the circular hem meets. The comb will pull out as usual.

METHOD THREE: WITH WASH-AWAY STABILIZER
I do love the ban-rol method because it creates a very clean and light hem, versus the serged method which may add thread bulk or opacity to your hem. However, ban-rol is not flexible enough to be sewn around tight curves. I have used it on fuller A-line dress hems so it can follow gentle curves, but what if you're trying to hem a rounded placemat or the curved sides of a man's dress shirt? Or something else weird-shaped in a bee print?:


I agree; those bees are CUTE AS HELL.

This method is similar in theory to the ban-rol method, in that you're sewing something to the right side of the garment and then flipping it over to help turn the hem. EXCEPT you're using something that is wide enough so you can trim it to match the curves exactly. And you can't make a comb out of it to remove later. It's essentially like sewing a facing on a garment edge, but you want the seam to roll farther back toward the wrong side of the garment, and you want the facing to disappear somehow.

So, you have some options: you can use tracing paper, which you can then tear off the hem, but you'll leave paper in your hem. You can use tear-away stabilizer, which also leaves stabilizer in your hem. Or you can use wash-away stabilizer, which will disappear after the garment's first washing. None of these are ideal, so it just depends on what type of fabric you're working with and what you have on hand.

I decided to try this sew-and-turn method with Fabri-Solvy, which is a fabric-like wash-away stabilizer normally used for appliqués and such. It comes in a range of widths and lengths, so I thought that getting a sheet that's 20-inches wide and 1-yard long would enable me to customize my own strips to match the curves of a small hem.


1. Pin the stabilizer on top of the right side of your hem. Trim it to match the raw edge perfectly:



2. You can now trim down the rest of the stabilizer to make it easier to handle if desired. Accuracy isn't important here:


3. Sew the stabilizer to the fabric at your desired hem width:



4. Now flip the stabilizer to the wrong side of the garment. This gets a little fiddly because the stabilizer is soft, but you want to make sure the raw edge of your fabric and the stabilizer are butted up against the fold of your hem so it's an even width around. Use your fingers to maneuver the curves into place. You can use the very tip of your iron to help crease the hem, but try not to let the iron touch the exposed stabilizer because it may shrivel and/or start to melt.


5. Sew the hem in place.


6. Trim away the excess stabilizer. You can leave it as is until its first full washing, or you can saturate the hem in water for a few minutes to dissolve the stabilizer still inside the hem, then let dry.



This method is pretty effective, but it can't really be used on fabrics that shouldn't be washed. I also felt like I was using my scissors a lot, which would be annoying on a longer hem. It uses more resources in general since the stabilizer is not reusable,and I would have to buy longer sheets for bigger garments. Still a good trick to know, yes?

-------------------------------------------------------------------------------------------------

I hope this post introduced you to some new ways to achieve a nice narrow hem. Do you have any other tricks or tips to add? Are there other kinds of materials that could be used instead of ban-rol or stabilizer to help roll hems? Let me know your favorite methods!


Monday, April 21, 2014

spring robin


This is one of those garments that you love to wear despite knowing it is not necessarily that flattering nor well-made. Ha, I act like that's a common thing for other people, too. I dunno, dude, I'm just on a baggy top kick and I don't know what else I want to wear these days. There's something pleasant and comforting about dressing like a frump. Let's call it effortfully effortless, because a lot of effort goes into knitting a baggy sweater you can take a nap in.


This little mama is knitted from the Robin pattern by Josée Paquin. It's a striped raglan-sleeve sweater with a dipped hem, knitted in one piece from the top down. It's purposely slouchy, with VERY LOW armholes for a batwing look. Wait a sec... batwings. I think I understand why she called this the Robin pattern.


Another example of someone wearing something all the time despite it being unflattering.


I wanted a sweater that I can wear in the transition months between cold and hot weather and vice versa, so I chose to make this pattern using a cotton/modal blend yarn: Shine Sport from Knit Picks. I have leggings that are cotton/modal and are heavenly to wear, and this yarn is just as delightful. I spent a lot of time just squishing it against my face. I went with the cream and black colorways to keep it classic. I used about 9.5 balls of the cream and 2 balls of black. I eventually realized I couldn't make it all the way through this sweater with so little black, so I shortened the arms to 3/4 length which is fine by me anyway.


I bought size 3 circular needles specifically to do this project, but my gauge was too loose. Instead of buying MORE needles, I just knitted the smallest size in the pattern and hoped for the best. It ended up being the size I was expecting, sooo I dodged that bullet. The insane thing about knitting garments is that you have no idea if it's going to fit until you've already invested many hours over many days, weeks, or months. At least with top-down garments you can try on as you go, but it's not like I would know how to make mid-knit fitting adjustment calculations anyway. 


It's a cropped-head kinda day, folks.

Short rows are used to shape the neckline as well as the high-low hem. The pattern has you do yarn-over short rows, which I found I prefer over wrap-and-turn short rows because it's easier to find them when you pass over them again. I don't know if these things have technical names! For help with the YO short rows, I used this resource.


I don't know what happened with my tension while knitting... or maybe it happened while weaving in all the ends (which I always half-ass) or blocking (I dried it in the dryer!)... but my stripes are a bit wonky. You can tell in some of the photos where they look jagged. Some of the white stitches above and below the stripes were looser than others, causing the black to dip or raise in random places. In one or two places, a black stitch just disappeared. Ran for its wee little life.


I'm still a rookie, okay?! I'm not that upset. I should just probably stop switching between English and continental style knitting so often, but I get hand cramps if I don't keep it varied. 

All in all, this was a fun and relatively simple knit. I love the colors I used and find it cozy as hell to wear. As a seamstress, I appreciate that the stripes automatically match across the body to the sleeves. It's the little things.


I doubt I'd make it again (do people knit sweater patterns more than once?), but if I did I would raise the armholes by a lot and streamline the fit if possible. 

Ravelry notes here.

I guess I've accomplished two of my six handmade "goals" this spring: I made a bag and now a spring-appropriate sweater. I still plan to tackle the others, except maybe the shorts, but I keep being lured in other directions. I'm less confident about Me-Made-May this year. I've been wearing fewer me-mades recently because I no longer work in an office (uh, hallelujah), so all the business-casual dresses and skirts I've made over the past 2+ years are starting to collect dust. More baggy tops to make, I guess. Who's with me there?

Thursday, April 10, 2014

portside duffel bag


Duffle bag or duffel bag? I think they're interchangeable but I've always used the -el version. Neither spelling is recognized by this spell check anyway. No, Blogger, I don't mean "ruffle" and I certainly don't mean "luffed." WHAT IS LUFFED?


It's probably not normal for a person to love a duffel bag as much as I love this one. I don't love much of what I make, I admit. Sure, there are handmade garments that I like because they're comfortable or flattering. But LOVE? I usually reserve that for family, my boyfriend, dogs, and French fries only. And now this bag. I kept complimenting its beauty (aloud, yes) while photographing it. Truly creepy.


The pattern is the duffel bag from Grainline Studio's Portside Travel Set, released in October 2013. It's a roomy bag (20" x 11.5" x 12") designed with a zip top, handles and a detachable shoulder strap made from webbing, two exterior pockets, and a full lining (hooray!). It's been on the back of my mind for awhile, but the only trips I've taken since its release have either required a monster suitcase or a tiny overnight bag -- which is the only luggage I've owned since moving to Phila. I'm taking a last-minute trip to Louisville this weekend and staying three nights, and I started wondering what I was going to use to pack for that length of trip. Ohhh right, Jen B's got my back as always. The whole set includes the duffel, a dopp kit for toiletries, and a zipped pouch for other small travel necessities. I didn't make the little guys but you bet I'm saving the pattern pieces.


The fabrics and notions I used are all from my stash because I was in a hurry to make this and I'm broke as a joke. I ain't mad about a little neutral-mixing, though. The contrast is made from wool coating that I never got around to using for a garment this past winter despite my obsession with it. It's a navy/black mix with gray plaid. I cut the side panels on the bias so I wouldn't have to match the plaids horizontally over the curve, ha. The bias-cut pieces are also interfaced to prevent stretching and drooping.

The self/bottom fabric is... can I say "vegan leather" so it sounds classier? It's cloth-backed home decor vinyl that I got for 99 cents at Jomar in Philly. It was easier to work with than I expected despite its bulk. Some basic tips for sewing with vinyl can be found here, which covers what I did, though I admit I used a low-heat iron on the cloth side of the vinyl to try (and mostly fail) to remove its wrinkles. Nothing melted. The only problem I had with the vinyl was uneven stitch length on the topstitching because it would randomly start to drag. The bag is large, too, so it would often get crammed against the wall behind my machine and the fabric would stall. Can't fix topstitching in vinyl, though, so I'm living with it!


I lined it in bright red fabric -- cut from an old Target curtain that didn't fit our windows. I could have used some beige linen in my stash but I wanted to make the piece somewhat more exciting since it's handmade and all. And you know I can't resist pairing red with black. Since I was using this pleather stuff, I also had to line the outside pockets because the back of it is so unsightly.


As far as construction goes, this bag is a pretty straightforward sew. I finished it from first cut to final slip stitch in less than 5 hours, which included the extra step of making my own double-topstitched straps instead of using webbing. I didn't have the hardware or patience to make a shoulder strap, but I made the handles long enough to be shoulder-slingable as is. Because you can't pin vinyl (it leaves permanent holes), I used Wonder Tape to secure the straps to the bag before sewing them on. It's basically just narrow double-sided tape that dissolves in water. Good for positioning zippers and pockets and such, too.


To give a better sense of its size, here is Corey wearing it. Don't be fooled -- this bag is for me, not him, though the fabric choices are decidedly unisex. He thought this bag was store-bought until I started getting it plumped up for its glamourous photoshoot. Natch he's requested his own now.


The Portside Duffel is larger than most other travel bag patterns I've come across, which was perfect for what I needed. In the first set of Corey-less photos of this post, the bag is stuffed with two throw pillows and about five or six pieces of multi-yard fabric. It's droopy without anything in it but I made sure the seams were sturdy enough to hold weight once full. I haven't packed my belongings for realzies in it yet, but I expect it will hold everything I need for a four day trip, especially now that it's warmer and I don't need to bring thick sweaters and boots.


The denim shirt he's wearing was also made by me a few months ago. For awhile this shirt stood as the best-loved handmade item in this household because honestly it's some of the best detail-sewing I've ever done, but now it's overshadowed (literally, here) by my AWESOME DUFFEL BAG. I love it. I luff it. Most-luffed duff in the world. This post has officially come full-circle. /gush

Who else is sewing to travel? ...Would you ever trust your handmade luggage in the hands of the airlines? Carry-on only!

P.S. With your help I fixed my pixelated image issue I  mentioned in my last post, at least on my end. Turns out it was a Google+ auto-enhance setting I needed to switch off. However, it seems the photos still don't show up on the Feedly app my iPhone so probably not Bloglovin' either. Really sorry -- I'll keep digging.