Thursday, June 5, 2014

red ava jacket

Hi, little cuties. This is my third post since last Thursday, which surprises no one more than me. But I gotta show you this red-as-red-gets jacket. It's red enough that I could probably wear this as part of a Sarah Palin costume for Halloween, but that topical humor ship has long since sailed. Still glad I took off my glasses for these photos anyway.


This is the Ava Jacket, a new release by Bluegingerdoll Patterns, my first garment made from this independent company. FULL-UP DISCLOSURE: I was a pattern tester for the Ava jacket. I did not get paid, though I did receive a rough draft of the pattern for free. I then pored over the instructions and worked hard to determine whether the pattern came together well and if everything was clearly laid out. I made a muslin first, based directly on the original pattern and instructions, then made this red-red version based on the FINAL edited instructions she sent us, while implementing some design modifications of my own.


I'm blogging about it by choice, because 1) I have a new handmade garment to show you guys, and this blog is primarily about show-and-tell, 2) I want to help spread the word of the pattern release on behalf of a hard-working and relatively new designer I admire, and 3) I want to provide a helpful review of a new pattern on my blog so when others are deciding whether or not to buy it, I can be a reliable resource. I just want to be transparent about the pattern testing process, in case there are any doubts about my motives! (See here for more discussion.) This should be one of my last pattern test/blog tour garments for awhile, so if it annoys you at all (and I understand why it would), just know that the interbloggy promotion should be calming down for awhile.

The Ava Jacket is a fully-lined kimono-sleeved swing jacket. It features a full lining, a wide shawl collar, loose 3/4-length sleeves and turned-backed cuffs. The cuffs and collar can be made in the same or contrasting fabric.

Images via Bluegingerdoll.com

Bluegingerdoll is known for her vintage-inspired aesthetic, which I admit isn't really my normal style. So for this wearable version, I omitted the lining, significantly reduced the width of the shawl collar, and narrowed the sleeves and cuffs (probably too much). I made it in a lightweight, drapey, poly crepey fabric so the flared back would drape gently and swish around. I was hoping for a more blazer-esque modern look with these changes.


Some things to note about this pattern. 

FIT: The jacket is easy to fit because it's built with generous ease and has kimono sleeves. I made a size 8 based on my bust and waist measurements, which seemed to work out fine. It was my fault that I narrowed these sleeves a bit too much which makes it hard to roll up the cuffs. I do find that as I'm wearing it, the shoulder seams slip backwards, so I'm often chucking the jacket forward to realign it.

CONSTRUCTION: There aren't many pieces to put together as far as jackets go, but there is a lotttttt of hand-stitching. The collar shell is hand-stitched to the facing, the cuffs are catch-stitched to the inside of the jacket, the hem is catch-stitched, and then the entire lining is hand-stitched to the jacket shell. Lordy lord lord. Believe me, I tried to get around some of it because that's not normally my thang. It may be yours, though! I machine-edgestitched the collar shell down for a clean finish, like you would normally do on a collar stand or waistband facing, for instance. You can kinda see that at the top of the photo of the jacket innards here:


I also left off the lining entirely, which was actually difficult to figure out how to do properly, since a lot of raw edges that you catch-stitched down, like on the cuffs and hem, are supposed to be covered up by a lining. I French-seamed everything and used lace tape to cover the raw edge of the hems, which I then turned up and blindstitched down by hand. I only had lace seam binding/hem tape, and it's white, and it looks terrible, so I almost plan to replace it with something red once I go notion shopping. With the dip of the swingy hem, the white hem tape is often flashed to the outside world. Ick.


With the test version, I struggled with the instructions for sewing the bottom of the front lapels; it gets confusing with all those corners of the collar shell, facing and eventually the lining. Abby did a good job working on that part and including more guidance for the final version. Still, it's a bit hard for me to wrap my head around how it's really supposed to come together. I made it work and it looks fine, but I'm not entirely sure I did it as instructed so I would like to see this demonstrated more in-depth with photos of a real garment versus the illustrations.


I like my red Ava jacket because it's unlike anything else I own. I'm a pear-shape so I often avoid jackets and tops with flared hems, but I think I like the silhouette of this one. It's a nice summer-weight garment to throw on for extra coverage or to add a knock-out punch of color to an outfit. I have a dreamy idea of an Ava in a silky floral, to keep up with the kimono jacket trend going on (right? Wut r fashun?).

The Ava was released along with the curve-hugging Betsy pencil skirt, which you'll find on many other testers' blogs. It's incredibly flattering on everyone I've seen so far and the little details -- like the button tabs on Version A -- are cute, so I'm actually tempted to splurge for the pattern even though I rarely wear pencil skirts these days! Abby of BGD carefully picked testers with different body types and with varying degrees of blog popularity, which I'm sure we can all appreciate. Check them out:

29th May – Tanya at MrsHughes (Betsy skirt)
2nd June – T at uandmii (Betsy skirt)
4th June – Mary at Idle Fancy
6th June– Tanya at MrsHughes (Ava jacket)
8th June - T at uandmii (Ava jacket)

Have you sewn a Bluegingerdoll pattern yet? What do you think of the new ones?

Monday, June 2, 2014

craftsy + butcher's + a plaid dress

There is a finished object sighting in this post, but I gotta yap about some other things before we get to that. First, a sincere thanks to all those who commented on my last post about my recent career change. Your support means everything, and I appreciate your willingness to discuss your own career goals and express your desires and/or hesitations about following a similar path. A lot of you said that you aren't "good enough" at sewing to even consider earning money from it. Believe me, you're better than you think, and you're probably better than me. It's amazing what you can do when you set the bar higher for yourself.

Craftsy Blog: Okay, time for some self-promotion. I've joined the ranks of sewing superstars Marie, Rochelle, Alida, Maris and others and am now a regular contributor to the Craftsy blog. I will be posting for the sewing category of their blog about twice a month. My first post is about knit fabrics (surprise), and tips for hemming them. Apparently I'm really into hemming stuff lately. Check it out and let me know if you have a technique to add.


Knits Workshop: omg. A friend of a friend of a friend (alright, we're all friends now) just opened a beautiful sewing studio in Queen Village of south Philly. It's called Butcher's Sew Shop, named in honor of the family-owned butcher shop that occupied the space for almost 80 years. Starting mid-June, they will be hosting intensive sewing classes, like flat patternmaking, draping, and various levels of garment construction from beginner to advanced. There are also shorter workshops and BYO stitch nights, and lil' ole me will be teaching a workshop called Sewing Knits (surprise). There will be three installments of the course on Monday evenings from 6-9pm starting June 30th. If you live in or near Philadelphia and would like to learn how to make the Deer & Doe Plantain T-Shirt, come hang out with us! To sign up, visit here and scroll down to the Special Workshops section to find "Sewing Knits". 


Alright, onward.

To round out this theme in threes, here's a dress made from a knit (surprise). Coincidence? Maybeh. I finished it surprisingly quickly so I am glad to throw it in this post with the rest of these knitty announcements.


I was afraid that sewing a dress in this colorway of plaid would be too autumnal or Christmasy or something else that would make people on the street be like "SHE CRAZY." Turns out, people on the street don't notice things like the colorway of my plaid, if you can believe it. They may think I'm a Catholic school girl, however, which is slightly more of a problem.


The pattern is McCalls 6599, the same pattern I used for a striped knit dress in 2012. I loved that dress to the point of spilling coffee all down the front of the skirt. I miss it. Playing with the direction of stripes and plaids is always fun, so this princess seam bodice and flared skirt are good foundations for that sort of thing. I cut the side pieces on the bias, though the pattern doesn't call for it. It's a pattern meant for a woven fabric, so as with the striped dress, I sized down and cut the back on the fold. All seams are serged and hems are coverstitched.


The fabric feels like a double knit and has nice body, which makes it a breeze to sew except at major seam intersections. I bought it from Jomar, a Philly discount fabric store where almost everything is $3.99/yd or less. I went on a major shopping spree there this weekend... I know, after confessing to you all how broke I am. But I set a limit of $100 and got 14 pieces of fabric, or a total of 25 yards, which I hope will keep me busy for awhile. I've already sewn three garments! See? I do still obsessively sew for myself when I have inspiration.


Anyone else sewing plaids for summer?

Thursday, May 29, 2014

sewing for money

$ewing for Money. Do you do it? Would you do it? Would you do it full-time?


No Georgies were harmed during the taking of this photo.

We've probably all mused over this topic at some point. When you practice a skilled trade, especially one like sewing that is so practical yet so rare, after awhile you start to wonder if you could earn some cash from it. Or even make it your career and your livelihood. If you love your hobby, why not pursue it wholeheartedly? Why yank yourself away from the purr of your sewing machine for your obnoxious morning commute, or pretend you're working when you're actually reading sewing blogs at your cubicle all day (ahem)? On the other hand, if you love your hobby, why monetize it and turn it into a stressor in your life? Or most importantly: why spend precious time and resources sewing for OTHER people who don't even love you unconditionally? I battled with these thoughts for over two years.

It was a weighty decision, but this past February I quit my full-time office job to become a seamstress. I'd been in fund development (grant writing and database management) for non-profit organizations for about four years. I thought I had found an ideal career for me: I was involved in social services to benefit vulnerable people in the local community, but working behind the scenes in a role where I could still be comfortable as a detail-focused introvert. I was promoted last year and figured the comfy salary could make up for whatever else I felt was missing. And yet despite how I thought I should enjoy my role, I never truly did. Once I realized a passion for sewing as a hobby in 2011, I could never shake the idea that it should be more than a hobby.

Yes, I took a photo of my resignation letter. I felt simultaneously idiotic and liberated.
I always laugh nervously when I tell people I quit my "real" job to sew, I guess as a way to ward off initial judgment before I am able to justify myself. Fortunately it doesn't need much justifying; so far, this decision is usually congratulated and celebrated in what feels like a sincere way. Even by my parents, who understandably worry about my financial well-being. On reflection, it seems like other people were always the ones asking and encouraging me to sell my services or my handmade items, and it was always me coming up with excuses for why that was implausible. Oh, I'm not a designer. Oh, I'm not skilled enough. Uh, I have a Sociology degree, for god's sake. Oh, I can't afford to leave my job. Oh, I don't even know where I would start.

And yet, every Sunday night, that feeling of dread for the work week ahead would creep over me. How was I going to slog through 40 more hours on my ass at a computer in the office? If I spend each workday thinking about how I'd rather be sewing, why am I not sewing? I felt like I might as well try it while I still could.

I sewed the tulle on these tutus. 8 yards each!
It's been three months now, so I've had a little bit of time to absorb the reality of it and adjust to my new lifestyle (and pay cut, if I'mma be real). I almost wasn't going to "announce" anything at all to my blog readers because I thought no one would give a damn, but I realize that many of you have considered making a similar move or have gone through it yourselves. There are many paths for sewing-related jobs, and I took one that a lot of you would probably never want for yourselves, but I figure I could still be a resource, an inspiration, or a deterrent for those who may be thinking of making a similar change.

So what do I DO now? The majority of my time is spent working in a sewing studio that does commissioned work for custom garments, alterations, home decor, accessories, costumes, design prototypes, everything. Less frequently, I help sew for a local baby apparel company and a youth ballet company whenever they need me.

Pocket hoops I sewed for an 18th c. costume. Includes steel boning and musket balls (?!)
I decided to take this route because I wanted to tread lightly and work for someone else who already knew how to run a business and could help me improve my sewing skills. While I felt ready to pursue sewing as a money-maker, I was not ready to be an entrepreneur. I certainly considered learning how to draft patterns to sell or opening my own Etsy shop, but I wanted a lower-stakes way to make sure that I could spend all my days sewing (not for myself) and still enjoy it.

Dizzy?  Girls' dresses / quilting cotton print explosion
I also wanted to move out of my sewing comfort zone. Sure, I can slap together a half-assed Archer shirt or a slouchy knit tee for myself, but can I alter a pattern to fit someone else's measurements? Can I sew with more difficult and delicate fabrics? Can I sew eight silk blouses in one week, or 40 pairs of lycra ballet pants in a weekend? Can I drape chiffon pleats on a dressform? Can I make a rub-off pattern of someone's storebought garment and modify it to their wishes, then put it all together without instructions? Can I baby-hem a mile-long bridal gown without losing my mind?

Wedding dress about to be altered
Turns out I can, but it's certainly not easy. In fact, the job is incredibly difficult. The pressure is on when someone's paying you to create or alter a garment that is very important to them. I have to speed up my process and be extremely accurate without sacrificing quality, which is daunting when you're learning new techniques and using tools that aren't your own (though my boss did oblige my request for fabric glue sticks, which I discussed as one of my favorite sewing tools here). Luckily I work with laid-back people who don't rush or judge (I am still SLOW, especially at alterations for some reason), and we can commiserate with each other over the strange or difficult projects while celebrating small successes like beautiful welt pockets.

40 pairs of spandex pants for a boys' ballet performance
I felt the personal benefits of this career change immediately. Well, for one, I have Mondays off, and it's insane (but no surprise, really) how three-day weekends can boost your morale and productivity 1000%. Hear that, Department of Labor? I also enjoy tackling a variety of projects and testing my sewing skills and abilities on a daily basis. I often get frustrated with myself at how slow or sloppy I can be, but it's satisfying to have a job where you take on and accomplish something new everyday and can notice visible improvements in your work. Plus I get to hang out with the studio dog:

Mandy, one of my new colleagues
All of these opportunities came about via Craigslist, believe it or not, so I had no "connections" beforehand. I was brave enough to include my blog address in my intro e-mails, which actually ended up working in my favor despite the embarrassing modeled poses and excessive use of the words "y'all" and "bad boys" on here. I think it helped to see a visual portfolio of what I've sewn but get a sense of my true (-ish!) personality, too.

I guess the biggest question you might have is whether I can still find time or energy to sew for myself. I wish I could say that my personal sewing output is the same, but it's not really. Part of that is because I work hourly now, so I'll often squeeze in more work hours at home to help cover dem billz. And a lower income means less fabric bought, and an unwillingness to replace my broken printer to print new PDF patterns, etc. So really, it's more a financial issue than it is a lack of desire to sew for myself. As of yet, I don't resent sewing at all. It still delights and challenges me in such valuable and indescribable ways. I surprisingly feel fulfilled sewing for other people, and can feel satisfied producing a well-made garment, even if I can't (or wouldn't want to, as it usually the case) wear it myself.

 --------------------------------------------------------------------------------------------
So tell me -- if you've made it to the end of this post, god help you -- have any of you had a similar experience of quitting your day job to pursue a passion? Do you sew for a living? Would you want to, or would you never even consider mixing your career with your hobby? Lemme know if you think I'm crazy, though I'm bound to disagree.

Thursday, May 22, 2014

in the round vs. in the flat

Are you a round or flat person? Um, lemme rephrase that. When given the choice, do you like to construct your garments using an in-the-round method or in-the-flat method? 

Nettie bodysuit sleeve attached flat

I don't know what else to call these techniques, really, so if you have no idea what I'm yapping about, here's the basic idea. On a bodice or top, most patterns have you sew the shoulder seams, side seams, and underarm sleeve seams pretty early on in the construction process. This creates round openings for the armholes, neck finishings, bottom opening (t-shirt hem/bodice opening to attach to skirt/etc), and sleeve caps. Here's the Scout Tee pattern as an example:


An alternative method is to leave those seams open so you can construct everything flat instead of in the round. For example, sew only one shoulder seam, attach the neck binding, then sew the other shoulder seam. You can also attach your sleeves and finish your hems BEFORE sewing the side seams and underarm seams. Here's an example from the Plantain Tee pattern for attaching sleeves flat:


I'm pretty fascinated with industrial techniques for making garments. When I "shop," I just turn clothes inside out to inspect the finishing techniques and make Hmmm noises. Of course, the fashion industry's primary goal is making clothing as quickly and cost-efficiently as possible, which means that the way they do things isn't necessarily the best way a home sewer should do them, or the way we even can with our measly little junk machines ;) However, I do strive to find ways to make sewing easier for me, and I will always try alternative methods if I think they will be faster but still achieve the same, or very similar, results. 

Storebought tank with straps attached flat before side seams are sewn

Sewing garments flat is one of those industrial methods that I will almost always turn to if possible. Awhile ago, Colette Patterns' blog featured a guest post from Sharon Blair explaining different industry practices. One of them was as follows: 
"Perform similar operations at the same time and sew flat. Sew the details first. Set these aside. Then start assembling the garment. Complete as much as you can before joining side seams. Sewing in a tube is more time consuming than sewing flat."

It's true that if you inspect your store-bought garments, you can tell that the side seams are usually sewn last in one continuous line of stitching from the sleeve opening to the hem. Many of my t-shirts have one shoulder seam sewn after the neckband is attached, and even sleeves that were hemmed before the underarm seam was sewn. To keep the serged seam more obscure, it's always pressed and tacked down toward the back of the garment. Would you ever know the differences here if you weren't looking for them?

Storebought t-shirt with sleeves hemmed before side seams sewn

I often change construction so I can use these methods, too. I never ever set in sleeves, no matter the fabric type or sleeve cap size-- I attach them flat because it's easier to ease the sleeve cap evenly this way. I'll do the same for armhole bindings because it's easier to sew on binding around curves when those curves are not yet attached in a circle. On t-shirt nec kbands, I will leave one shoulder open so I don't have to do any measuring; I'll just cut a long binding piece and "feel the stretch" as I pin it on, then snip off the excess once I reach the other shoulder. For super small hem openings, like the legs of baby leggings, hemming the legs flat is faster than forcing your presser foot around a tiny tube, especially on a coverstitch machine like mine that likes to stall and skip stitches when sewing over seams.


I figured everyone else would be lazy like me and prefer the flat construction method. However, when I was pattern-testing the Nettie Bodysuit, I applauded Heather for including instructions for constructing the neckband flat (shown above). She followed up with me to say that other testers didn't like that method, so she changed it back to "in the round" instructions for the published version. Y'all are just some tidy little seamsters, aren'tcha. 

So that made me wonder why someone would choose the round over the flat method. Does the end result look cleaner? Do you find that the methods are actually comparable in how easy or fast they seem? Do you use one on certain fabric types only? Or you just prefer to follow the pattern instructions regardless? What's your choice?

Wednesday, May 7, 2014

stretch


My doctor told me that with all the hunching forward I do (at the computer, sewing machine, cutting table, ironing board, etc.), I need to stretch my upper body more, like with some regular yoga (or "sewga," as my colleague calls it). Don't want those pectoral muscles to shrink. Eternal slouch!

Have I taken her advice? Uh barely. But I have sewn some stretch garments...? Surely that counts toward something, like my emotional health and blogger points. And I could probably do yoga in this outfit as long as I was home alone with the curtains drawn, so we're getting there.


I was a chuffed little pattern tester for Closet Case Files' newest pattern, the Nettie Bodysuit, named after a real Nettie you may know. I remember bodysuits from the 90s as a child, but the appeal of them now is that they stay smooth and tucked in under all the high-waisted skirts I own without all that unsightly scrunched up bulk underneath. I remember Heather's debut bodysuit that she wore paired with her Tania culottes last year, and I thought she was a genius. Now she brings her genius to the masses.

The pattern comes with two neckline variations (high neck and scoop), three back neckline variations (high neck, medium scoop, and looooow scoop if you dare), and three sleeve lengths (short, 3/4 and long). Options also include a snap crotch for practicality's sake (interpret as you may), a shelf bra, and a dress length hem for some bodycon sauciness. Here I've made the bodysuit with scoop front neck, medium scoop back, and 3/4 sleeves. What else would you expect of me, really? I did make the snap crotch and I laugh every time I have to re-snap because I'm certainly not graceful at it. Maybe I attached them in the wrong direction.


Here's Ms. Thang bravely modeling the suit on its own. She's not self-conscious of her dented hips and Barbie-like thigh gap:


As you can see (..kinda), the suit is designed for full rear coverage. The leg openings, like the neckline, are bound with self-binding that is pulled quite snugly for a close fit. The whole point of a bodysuit is that it's a close fit. The Nettie has mega negative ease and calls for a fabric with 4-way stretch and 5-10% lycra content. Fabric makes all the difference in the fit of this pattern, so check out Heather's extensive post about Nettie fabrics, as I can't give much more advice than she does.

For this version I used a charcoal heather gray cotton-spandex knit from Girl Charlee (found here), which has 75% stretch. I made a generous size 8 (probably more like a 10) in the torso and arms and graded out to a size 12 at the hips. EDIT: Heather has since updated the sizing, so by her chart I am a true 8 in the torso now, instead of the 6 I fell in before. If you follow her advice for fabric selection and sizing, you should be fine.


I'm so glad I made this skirt, too. The pattern is a lengthened version of a rub-off I did of an old store-bought skirt. I've decided I really need to start wearing longer (knee-length) skirts, especially in bare-legged weather, but I don't have that many casual ones. I also wanted to copy the RTW way of constructing a waistband like this: it's wide so provides stability and comfort, but there's a hidden interior channel for 3/4" elastic at the top, so the waistband won't flip over or start to droop like my other handmade knit skirts that are only held up with fabric.

I bought this fabric at the same time as the fabric for the Nettie with the intention of wearing them together. Though the fabric colors are both called "charcoal," the grays are pretty different -- the skirt is more blue -- but whatever. There's always an ~element of surprise~ in online fabric shopping. The skirt fabric is a cotton jersey in a "plant silhouette" print, also from Girl Charlee (found here). It's pretty cool but pretty similar to the print of my first Cambie dress, which I didn't realize until I started sewing it. Oh well -- Cambie doesn't get out much these days, but this skirt does. It's very breezy and soft, and the length means it normally stays decent in gusts of wind.


It's sheer so I lined it in some white fabric I originally bought to line a swimsuit. It's one of those performance knits from JoAnn. I have two swimsuit fabrics in my stash and wavering intention of actually ever making one, so I snatched the lining from the pile when I was in one of those anti-swimsuit moods after eating too many Reese's cups shaped like Easter eggs. DON'T say you can blame me. The lining is attached to the waistband as one with the skirt shell, but hangs free.


I'm planning on recreating this exact outfit in many different fabrics. A striped Nettie is definitely next in the queue. Um, I wonder if Girl Charlee offers in-house credit cards.

If you're still not convinced, check out Carolyn's seven Netties, Lauren's non-bodysuit Nettie, Lindsay's Nettie dress, Mokosha's low-back Nettie, and Nettie's own Netties. Then get your Nettie here. Phew, links.

So, do you find time to stretch out your aching sewing muscles with some sewga, or is your doc worried about the inevitable seamstress hunch, too?